INNOMAX INFORMATION:
PRODUCT CATEGORIES:

 
Be Sure To "LIKE" Us On Facebook


Heater Operation And Troubleshooting Information
Heater Operation And Troubleshooting Information Banner


TIPS FOR TROUBLESHOOTING & ENJOYING YOUR NEW THERMAL GUARDIAN HEATER

DO NOT
plug the heater control into outlet or plug the heating pad into heater control until reading below:


  • PLEASE READ the comprehensive instruction sheet packaged with your heater.

  • DO NOT attempt to install a heater in a filled or partially filled mattress.

  • We encourage plugging the power cord into a surge protector.

  • Unroll the heating pad and reverse roll so as pad will then lay flat. DO NOT crease pad.

  • Be sure that the pad and temperature sensor has not shifted over any cracks in the decking or foundation(s) after installing the liner and waterbed mattress.

  • Begin to fill your watermattress to your desired sleep preference. After completion you can now plug your heater pad into your heater control. Now plug the heater power cord into a working surge protector.

  • Be sure all components are plugged in securely.

  • The energy efficient design heats at an average of a ¼ to ½ degree per hour. Ideal settings are between 80° - 86°. PLEASE NOTE: turning your settings to 100° will not heat the water any faster. The unit may take 5-7 days to heat to the desired temperature based upon the water and room temperature.

  • Heavy fiber beds may require 2 low watt heaters for proper temperature regulation.

  • DO NOT use full watt designed heaters in any type of softside sleep system.(Be sure to use the correct heater for your type of sleep system - Hardside or Softside).

  • DO NOT place heating pad on any foam or any other foreign material.